Generic

Frenchic Smoke Signal Trim Paint

Frenchic Smoke Signal Trim Paint
  • 3 stars, based on 1 votes
  • Water based Suitable for interior use only Chalk and mineral paint formulated for trims, skirting, doors etc. Also suitable for other interior woodwork, powder coated radiators, and all sorts of furniture including laminate
  • UKCA and EN71-3 certified (safe for use on children’s toys) EN71-3:2019+A1:2021 Ingredients: Chalk, Clay, Titanium Dioxide, Resin, Talcum, Preservative Low VOC content and low odour
  • Finish – soft satin sheen Self-sealing - does not require a top coat Self-priming – no primer or undercoat required for any surface except bare metal (in which case use a suitable metal primer)
  • A 500ml tin will provide a coat of up to 7m2. For a durable finish, a minimum of 2 coats is required, so your 500ml tin should provide full coverage for 3.5m2 on non-porous surfaces like laminate or metal. Always ensure you have enough paint for your whole project. When more than 1 tin of the same colour is needed, it is good practice to ensure batch numbers are identical or to intermix batches prior to commencing painting.
  • Porous, or ‘thirsty’, surfaces like bare wood or MDF, tend to absorb paint meaning additional coats are likely to be required to achieve a durable finish. In this case, your 500ml tin will provide less than 3.5m2 of full coverage. If you apply the paint too thinly, durability may be affected.
  • Ensure surfaces are in suitable condition for painting - clean, dry, free from wax, grease or penetrating substances and in sound condition. If previously painted, remove loose or flaking paint. Surface preparation required in addition to the above – clean with Frenchic Sugar Soap, rinse and dry thoroughly. Hand-sand sufficiently to abrade the surface. Wipe off any dust, paint away!
  • Take care on opening the tin lid – a Frenchic tin opener is recommended Stir thoroughly with a wide implement, such as a Paint Paddle, prior to each use
  • Apply with a good quality brush or roller To allow self-levelling, avoid overworking the paint Allow a minimum of 4 hours between coats (even if the paint feels touch dry) Curing (hardening) time is up to 3 weeks in normal conditions. Treat gently until curing is complete
  • Reseal tin after use. Clean up any spills immediately with water. Wash brushes in warm, soapy water. Do not store where the tin could be subjected to damp, frost, freezing or high temperatures.
  • We make every effort to match our online colour swatches to the paint but colours can vary depending on a number of factors, including screen settings. This means that we cannot guarantee the paint will exactly match what you see on screen. Please refer to a colour chart or sample sachet (where available) to assist with choice.
£21.95 (£29.27 / l)View at Amazon
Amazon price as of 2024-02-29 11:59Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.
Rate this product

Available in these countries

Frenchic Smoke Signal Trim Paint
Frenchic Smoke Signal Trim Paint
Frenchic Smoke Signal Trim Paint

Frenchic Smoke Signal Trim Paint

£21.95 (£29.27 / l)

Product information

LaminateUKCA and EN71 3 certified safe for use on children s toys
EN71 32019 A12021
IngredientsChalk Clay Titanium Dioxide Resin Talcum Preservative Low VOC content and low
OdourFinish soft satin sheen Self sealing does not require a top coat Self priming no primer or undercoat required for any surface except bare metal in which case use a suitable metal
PrimerA 500ml tin will provide a coat of up to 7m2 For a durable finish a minimum of 2 coats is required so your 500ml tin should provide full coverage for 3 5m2 on non porous surfaces like laminate or metal Always ensure you have enough paint for your whole project When more than 1 tin of the same colour is needed it is good practice to ensure batch numbers are identical or to intermix batches prior to commencing
PaintingPorous or thirsty surfaces like bare wood or MDF tend to absorb paint meaning additional coats are likely to be required to achieve a durable finish In this case your 500ml tin will provide less than 3 5m2 of full coverage If you apply the paint too thinly durability may be
AffectedEnsure surfaces are in suitable condition for painting clean dry free from wax grease or penetrating substances and in sound condition If previously painted remove loose or flaking paint Surface preparation required in addition to the above clean with Frenchic Sugar Soap rinse and dry thoroughly Hand sand sufficiently to abrade the surface Wipe off any dust paint
AwayTake care on opening the tin lid a Frenchic tin opener is recommended Stir thoroughly with a wide implement such as a Paint Paddle prior to each
UseApply with a good quality brush or roller To allow self levelling avoid overworking the paint Allow a minimum of 4 hours between coats even if the paint feels touch dry Curing hardening time is up to 3 weeks in normal conditions Treat gently until curing is
CompleteReseal tin after use Clean up any spills immediately with water Wash brushes in warm soapy water Do not store where the tin could be subjected to damp frost freezing or high
TemperaturesWe make every effort to match our online colour swatches to the paint but colours can vary depending on a number of factors including screen settings This means that we cannot guarantee the paint will exactly match what you see on screen Please refer to a colour chart or sample sachet where available to assist with choice

Customers who viewed this item also viewed


Customers who bought this item also bought

Frenchic Smoke Signal Trim Paint Review

Write a review

How do you rate this product?

Related categories


Related searches