Car | Working process 1 15s the red light flashes three times then the 12 25kHz ultrasonic wave is outputed accompanied by the white LED flashes 16 30s product readiness 31 50s repeat the process from 1 15s 51s 1min 10s product readiness 1min 11s 1min 40s repeat the process from 1 15s Stop after the above actions 1 minute Repeat the above actions twice and stop for 3 minutes or 5 |
---|---|
Minutes | When the car starts our device automatically switches to standby mode and stops working 5 minutes after stopping the car the working mode is activated to protect the car from pests such as |
Mice | Battery low voltage detection |
Function | The product detects the battery voltage during operation If the battery voltage is below 9 2 V the product emits an alarm and no longer works at this time to prevent a power failure of the battery When the battery voltage is restored the alarm will automatically stop and enter standby |
State | Easy to |
Install | When installing connect the two plugs of the power cord to the plus and negative pole of the car battery and attach it with the included cable ties And has reverse connection protection function Prevent the artificial connection of the circuit from damaging the product |
Grunda Marten deterrent car marten car / car, ultrasonic frequency 12 kHz-25 kHz, connection to 12 V car battery, marten protection, animal repellent, animal deterrent with 3 LEDs flash light. Review
Write a review